FREE SHIPPING NZ WIDE FOR ALL ORDERS OVER $50 (UNDER 10KG)

Neodymium Countersunk Pot Magnet - 36mm x 9mm Neodymium Countersunk Pot Magnet - 36mm x 9mm Neodymium Countersunk Pot Magnet - 36mm x 9mm Neodymium Countersunk Pot Magnet - 36mm x 9mm Cart

Neodymium Countersunk Pot Magnet - 36mm x 9mm

Product code: AMFYPA36

Neodymium Countersunk Pot Magnet - 36mm x 9mm - AMF Magnets New Zealand
Neodymium Countersunk Pot Magnet - 36mm x 9mm - AMF Magnets New Zealand
$20.16 each for 1 to 9 items
$14.71buy 10 to 99 itemsand save 27%
$13.16buy 100+ itemsand save 34%
Total
$20.16

Prices are GST Incl.

Volume pricing available on request

Leading Magnet Supplier

Shipping Worldwide*

30 Day Returns

Same Day Dispatch*

Neodymium Countersunk Pot Magnet - 36mm x 9mm

Rated 5.0 out of 5
Based on 5 reviews
Product Code AMFYPA36
Pull Force* 29 kg
Weight 52 gm
Style Rare earth countersunk pot magnet
Coating Nickel (NiCuNi)
Direction of Magnetisation Axially magnetised thru the 9mm
*Measured against up to 10mm mild steel.
countersunk

Magnetic Product Description:

This rare earth pot magnet has a diameter of 36mm, a countersunk hole diameter of 6.5mm and a thickness of 9mm. It has a pull force of 29kg and a weight of 52 grams. It is identified by the AMF magnet part number AMFYPA36.

Uses for our rare earth countersunk pot magnets.

Modern tradespeople that construct the dream homes of wealthy celebrities, use magnets during construction and also incorporate them into the design of their home for everyday use, These builders, like celebrity endorsements, are promoting a product that is new and desirable. Secret fixing, soft close drawers, seamless cabinetry, discreet hanging and low pull-force release and reattachment properties are the hallmarks of contemporary and futuristic design for the modern builder, and they achieve this by employing Countersunk Neodymium Pot magnets.

Because of their metal cap that enhances strength, our 36mm rare earth pot magnets are suitable for attaching metal objects to a wall, ceiling or any other surface. It has a countersunk hole for easy attachment and a mild-steel nickel coated cover that protects it from chipping or cracking from repeated use.

 

Product Code
 DØ D1Ø D2Ø H Holding force(kg) Weight (g)
AMFYPA16 16 3.5 6.5 5 5 7
AMFYPA20 20 4.5 8.5 7 6 13
AMFYPA25 25 5.5 10.4 8 14 23
AMFYPA32 32 5.5 10.4 8 25 39
AMFYPA36 36 6.5 12 9 29 52
AMFYPA42 42 6.5 12 9 37 76
AMFYPA48 48 8.5 16 11.5 68 120
AMFYPA60 60 8.5 16 15 112 252
AMFYPA75 75 10.5 19 18 162 488
Write a Review
average rating 5.0 out of 5
Based on 5 reviews
  • 5 Stars
    5 Reviews
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
5 Reviews
Reviewed by Jim
I recommend this product
Rated 5 out of 5
Review posted

Great magnets

I've attached two of the 36mm x 9mm magnets to my driveway picket gates. The magnets are screwed into 50 x 50mm treated pine laths attached to a couple of short star stakes. On the gates themselves I have attached two Aldi steel mending straps.

When I open the gates fully, the mending straps touch the magnets, holding the gates in place.

These magnets are very powerful. and will hold the gates open even in 100kph winds.

I recommend these to anyone having similar issues requiring strong magnets.

Loading...
Was this helpful?
Reviewed by Jim
I recommend this product
Rated 5 out of 5
Review posted

Great magnets

I have these on my driveway (picket) gates and they are strong enough to hold the gate open, even in 100kph winds. Very easy to install, I just needed a couple of pre-drilled steel plates which I bought from Aldi.

Loading...
Was this helpful?
Reviewed by Kenco
I recommend this product
Rated 5 out of 5
Review posted

Fits the Bill

Happy days and a strong connection , they work well

Loading...
Was this helpful?
Reviewed by Brian
I recommend this product
Rated 5 out of 5
Review posted

Fixing Awning

To stop heavy awning/blind from flapping noisily in slightest breeze fixed magnets to blind, screwed steel washers to frame. Blind now rigidly fixed in place desired. The magnets are bit too strong; a smaller size would have been adequate.

Loading...
Was this helpful?
Reviewed by Esme
I recommend this product
Rated 5 out of 5
Review posted

bought for manget fishing

we bought 6 magnets and my husband bolted 3 on each side of an oval shaped piece of stainless steel with stainless steel bolts and lock nuts. He drilled a hole at the end of the s.s. plate and attached a stainless steel D bolt with our rope/thimble attached, cut a slit in the end of the D bolt bar and spread it with a bolster, then cut the end of the D bolt so that it can't undo and doesn't get caught when we use it for magnet fishing in the rivers and at jetties. You never know what goodies can be hauled in.:)

Loading...
Was this helpful?

No FAQ available

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.