Ferrite Pot Magnet - 36mm x 7mm

Product code: 89019

$9.32for 1 to 9 items
$8.32buy 10 to 99 itemsand save 11%
$6.84buy 100+ itemsand save 27%

Prices are GST Incl.

Volume pricing available on request

Ferrite Pot Magnet - 36mm x 7mm

Product Code 89019
Weight 37 gm
Style Ferrite Pot Magnet
Direction of Magnetisation Axially magnetised thru the 8mm

Magnetic Product Description:

This ferrite pot magnet has a diameter of 36mm and a height of 7mm. It has a 9mm hole magnet bore and a 4.8mm pot bore. This ferrite magnet is identified by the AMF magnet part number 89019.

Uses for our ferrite pot magnets:

These Ferrite Pot magnets are manufactured with a mild steel casing over a ferrite ring magnet and have a 5mm hole for fixing with a screw, or alternatively a nut and bolt. N.B. Check the mag bore dimension seen in the diagram to the left to see the maximum size of nut it will accommodate. This makes attaching a magnet to non-magnetic surfaces easy. Wood, Plastic or just about any material can be connected magnetically to ferrous surfaces by attaching these corrosion-resistant Holding Pots. Attaching a threaded eyelet or hook can also be useful in some instances and will also provide a leverage point for easy removal or repositioning as required. The casing also concentrates the pull force to the uncapped base (North Pole), increasing the holding power while also protecting it from impact damage.

The chart below shows other available dimensions for this type of Holding Magnet.

 

ModelNo. D d1

Magnet Bore

Pot Bore H Pull force Weight (g)
89016 40   8.6mm  M5 thread 8 7 Kg 0.0950
89017 25    C/sunk 4.8 8   0.0170
89018 32    C/sunk 5.8 7   0.0280
89019 36    9mm hole 4.8 7   0.0370
89020 55   22mm 4.6 11 12 Kg 0.0600
89030 88   32mm 13.6 18.5 30 Kg 0.0700
89031 90 32  C/sunk 4.6 12 30 Kg 0.0700

Ferrite Pot Magnet - 36mm x 7mm (89019)

Magnetic Product Description:

This ferrite pot magnet has a diameter of 36mm and a height of 7mm. It has a 9mm hole magnet bore and a 4.8mm pot bore. This ferrite magnet is identified by the AMF magnet part number 89019.

Uses for our ferrite pot magnets:

These Ferrite Pot magnets are manufactured with a mild steel casing over a ferrite ring magnet and have a 5mm hole for fixing with a screw, or alternatively a nut and bolt. N.B. Check the mag bore dimension seen in the diagram to the left to see the maximum size of nut it will accommodate. This makes attaching a magnet to non-magnetic surfaces easy. Wood, Plastic or just about any material can be connected magnetically to ferrous surfaces by attaching these corrosion-resistant Holding Pots. Attaching a threaded eyelet or hook can also be useful in some instances and will also provide a leverage point for easy removal or repositioning as required. The casing also concentrates the pull force to the uncapped base (North Pole), increasing the holding power while also protecting it from impact damage.

The chart below shows other available dimensions for this type of Holding Magnet.

 

ModelNo. D d1

Magnet Bore

Pot Bore H Pull force Weight (g)
89016 40   8.6mm  M5 thread 8 7 Kg 0.0950
89017 25    C/sunk 4.8 8   0.0170
89018 32    C/sunk 5.8 7   0.0280
89019 36    9mm hole 4.8 7   0.0370
89020 55   22mm 4.6 11 12 Kg 0.0600
89030 88   32mm 13.6 18.5 30 Kg 0.0700
89031 90 32  C/sunk 4.6 12 30 Kg 0.0700

Ferrite Pot Magnet - 36mm x 7mm (89019)