Neodymium Ring Magnet - (OD)24mm x (ID)5mm x (H)12mm | N45
Product code: R-OD24H12ID5-N45
Leading Magnet Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Neodymium Ring Magnet - (OD)24mm x (ID)5mm x (H)12mm | N45
This neodymium magnetic ring has an outer diameter of 25mm, an inner diameter of 10mm and the height of 10mm. It is identified by the AMF magnet part number R-OD25H10ID10-N35.
"Uses for our Rare Earth Ring Magnets:
Rare Earth Ring magnets are available in a wide range of sizes and with various magnetic grades and inside diameter measurements. Choosing the right magnet for your particular application can be as simple as calculating how much weight you need to support.
Ring magnets made from rare earth materials like Neodymium offer the greatest holding capacities for their size and are widely used for commercial retail displays, advertising signage and countless other practical uses. Rare earth Ring magnets are often slipped over a vertical tube for educational purposes, where they clearly demonstrate the repelling magnetic force that occurs when alike pole faces come together.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
