FREE SHIPPING NZ WIDE FOR ALL ORDERS OVER $50 (UNDER 10KG)

Neodymium Fishing Magnet with M12 Threaded Eyelet - 116mm x 70mm Neodymium Fishing Magnet with M12 Threaded Eyelet - 116mm x 70mm Neodymium Fishing Magnet with M12 Threaded Eyelet - 116mm x 70mm Neodymium Fishing Magnet with M12 Threaded Eyelet - 116mm x 70mm Cart

Neodymium Fishing Magnet with M12 Threaded Eyelet - 116mm x 70mm

Product code: AMFYPLNM116

Neodymium Fishing Magnet with M12 Threaded Eyelet - 116mm x 70mm - AMF Magnets New Zealand
Neodymium Fishing Magnet with M12 Threaded Eyelet - 116mm x 70mm - AMF Magnets New Zealand
$291.31 each for 1 to 9 items
$261.39buy 10 to 99 itemsand save 10%
$235.48buy 100+ itemsand save 19%
Total
$291.31

Prices are GST Incl.

Volume pricing available on request

Leading Magnet Supplier

Shipping Worldwide*

30 Day Returns

Same Day Dispatch*

Neodymium Fishing Magnet with M12 Threaded Eyelet - 116mm x 70mm

Rated 4.5 out of 5
Based on 2 reviews
Product Code AMFYPLNM116
Pull Force* 400kg
Weight 1800 gm
Style Rare Earth Fishing Magnet
Coating Nickel (NiCuNi)
Dimensions Height:70mm, Diameter:116mm
*Measured against up to 10mm mild steel.

Magnetic Product Description:

This Rare Earth Threaded Eyelet Pot Magnet has a pull force of 400kg and a weight of 1.8kg. It has a diameter of 116mm and a M12 thread. It is identified by the AMF magnet part number AMFYPLNM116.

Uses for Rare Earth Threaded Eyelet Pot Fishing Magnets:

This Neodymium holding pot magnet is ideal for magnet fishing and retrieving applications. Other uses include lifting, hanging, or any situation where you need a strong magnet. The item ncludes a Stainless Steel M12 Eyelets. The nickel coating and steel cap reduces chipping or cracking and improves overall durability. Thread locker is strongly recommended for magnet fishing to keep the eyelet from backing out.

Write a Review
average rating 4.5 out of 5
Based on 2 reviews
  • 5 Stars
    1 Review
  • 4 Stars
    1 Review
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
Customer photos and videos
Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal
2 Reviews
Reviewed by JM
Verified Reviewer
I recommend this product
Rated 5 out of 5
Review posted

JM

We are drilling at angle through the pile. There are two layers of steel one at the top which is normally in the first 200mm or so and easy to access and remove. The bottom layer is at approximately 1.3m and often difficult to fish out as it is still embedded in the concrete. Magnets often get hung up on the steel on the way down. We think this Neodymium Fishing Magnet would be perfect for this application.

Loading...
Open Image by JM in a modal Open Image by JM in a modal Open Image by JM in a modal Open Image by JM in a modal Open Image by JM in a modal
Was this helpful?
Reviewed by Gregga
I recommend this product
Rated 4 out of 5
Review posted

Great product

Does what is says, delivered on time so far so good

Loading...
Was this helpful?

No FAQ available

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.