Neodymium Disc Magnet - 6mm x 1.5mm | N45
Product code: D-D6H1.5-N45
Leading Magnet Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Neodymium Disc Magnet - 6mm x 1.5mm | N45
Magnetic Product Description:
This neodymium magnetic disc has a diameter of 6mm and a height of 1.5mm. It has a magnetic flux reading of 3063 Gauss and a pull force of 494g. It is identified by the AMF magnet part number D-D6H1.5-N45.
Uses for our Rare Earth disc magnets:
Magnets like these are ideally used for applications where magnetic strength is important but surface area is restricted. The reduced pole surfaces footprint is boosted in magnetic strength by the thickness of the magnet which reaches 1/3rd its diameter and pull force is further enhanced by the N45 Grade magnetic material it is made of. The dimensions of this magnet allow it to be recessed into wood or plastic to a depth of 5mm and secured with glue. They are commonly used in Metal separation and decontamination, water conditioning, metal detectors, tool and knife holders, wall stud and noggin locators, magnetic healing therapy, magnetic folder closures and cabinetry.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
