Neodymium Disc - 6mm x 2mm Gold NO DIMPLE
Product code: 20076A
Leading Magnet Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Neodymium Disc - 6mm x 2mm Gold NO DIMPLE
Magnetic Product Description:
This rare earth disc has a diameter of 6mm and a height of 2mm. It has a magnetic flux reading of 3495 Gauss and a pull force of 540 grams. It is identified by the AMF magnet part number 20076A.
Uses for our rare earth disc magnets:
The Gold Coating is an additional cosmetic benefit of this small N38 Grade Neodymium magnet. This makes it appealing to those using magnets to display their lightweight items such as decorations, artwork and crafts. When the attachment point is visible a Gold Coated Magnet can add an aesthetic benefit over regular Nickel coatings. It is popular with Jewellery Makers and Hobbyists for this reason.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
