Neodymium Disc Magnet - 6mm x 2mm | Gold Coating | North Marked

Product code: 20076

$1.38 for 1 to 9 items
$1.15buy 10 to 99 itemsand save 16%
$0.95buy 100+ itemsand save 31%

Prices are GST Incl.

Volume pricing available on request

Leading Magnet Supplier

Shipping Worldwide*

30 Day Returns

Same Day Dispatch*

Neodymium Disc Magnet - 6mm x 2mm | Gold Coating | North Marked

Product Code 20076
Pull Force* .540kg
Weight 1 gm
Dimensions Height:2mm, Diameter:6mm
*Measured against up to 10mm mild steel.

Magnetic Product Description:

This rare earth disc has a diameter of 6mm and a height of 2mm. It has a magnetic flux reading of 3452 Gauss and a pull force of 540 grams. It is identified by the AMF magnet part number 20076.

Uses for our rare earth disc magnets:

Artisans, Jewellery Makers and Hobbyists often use this small Neodymium magnet to assemble and display their creations. The Gold coating is an additional cosmetic benefit of this small N38 Grade magnet. This makes it appealing to those who use magnets to display lightweight items such as decorations and crafts. When the attachment point is visible a Gold Coated Magnet can add an aesthetic advantage over regular Nickel coatings. The dimple on the surface identifies the Northern Polarity and helps ensure correct arrangement when two magnets are being used for attachment to non-metallic surfaces and glued in place permanently.

No FAQ available

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.