Amazing grip for small size
Used to retain cover on custom remote control
Product code: 20073
This rare earth disc magnet has a diameter of 6mm and a height of 2.5mm. It has a magnetic flux reading of 4033 Gauss and a pull force of 720grams. It is identified by the AMF magnet part number 20073.
This magnet is ideal for hanging papers, diagrams, artwork, blue prints or displayed materials permanently or on a semi-permanent basis. The 2.5mm height and relatively wide surface area provide a secure holding ability with little chance of dislodgement by accidental sheer force. Gently lifting the paper or diagram that the magnet is holding breaks the bond and releases displayed items when the time for interchange or repalcement comes.
Neodymium Disc - 6mm x 2.5mm N38 (20073)
Grade | |
---|---|
N38 | N/A |
Max Operating Temperature °C | |
<=80 | N/A |
Remanence | |
1.09-1.17 | N/A |
Coercivity | |
12.3-13>=859 | N/A |
Intrinsic Coercivity | |
>=10.8 | N/A |
Max Energy Product | |
>=955 | N/A |
Grade | N38 |
Max Operating Temperature °C | <=80 |
Remanence | 1.09-1.17 |
Coercivity | 12.3-13>=859 |
Intrinsic Coercivity | >=10.8 |
Max Energy Product | >=955 |
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
This rare earth disc magnet has a diameter of 6mm and a height of 2.5mm. It has a magnetic flux reading of 4033 Gauss and a pull force of 720grams. It is identified by the AMF magnet part number 20073.
This magnet is ideal for hanging papers, diagrams, artwork, blue prints or displayed materials permanently or on a semi-permanent basis. The 2.5mm height and relatively wide surface area provide a secure holding ability with little chance of dislodgement by accidental sheer force. Gently lifting the paper or diagram that the magnet is holding breaks the bond and releases displayed items when the time for interchange or repalcement comes.
Neodymium Disc - 6mm x 2.5mm N38 (20073)
Grade | |
---|---|
N38 | N/A |
Max Operating Temperature °C | |
<=80 | N/A |
Remanence | |
1.09-1.17 | N/A |
Coercivity | |
12.3-13>=859 | N/A |
Intrinsic Coercivity | |
>=10.8 | N/A |
Max Energy Product | |
>=955 | N/A |
Grade | N38 |
Max Operating Temperature °C | <=80 |
Remanence | 1.09-1.17 |
Coercivity | 12.3-13>=859 |
Intrinsic Coercivity | >=10.8 |
Max Energy Product | >=955 |
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.