Reviewed by BarryP
I recommend this product
Very good
Arrived promptly and as described
Loading...
Was this helpful?
Neodymium Disc - 6.35mm x 5.08mm
Product code: 20069
$1.08buy 10 to 99 itemsand
save 21%
$1.02buy 100+ itemsand
save 26%
Total
$1.38
Leading Magnet Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Neodymium Disc - 6.35mm x 5.08mm
Rated 5.0 out of 5
Product Code
20069
Pull Force*
1.25kg
Weight
1 gm
Style
Rare Earth Disc magnet
Coating
Nickel (NiCuNi)
Direction of Magnetisation
Axially magnetised
Dimensions
Height:5.08mm, Diameter:6.35mm
*Measured against up to 10mm mild steel.
Magnetic Product Description:
This rare earth disc has a diameter of 6.35mm and a height of 5.08mm. It has a magnetic flux reading of 5318 Gauss and a pull force of 1.25kg. It is identified by the AMF magnet part number 20069.
Uses for our rare earth disc magnets:
This small but strong Rare Earth disc has dimensions that lend itself to applications that require an ability for the user to remove or reposition the magnet, or the object it holds in place, on a regular or scheduled basis. The thickness or profile of this disc allows it to be slid or pushed by the user applying sheer force or, in other words, a pressure at right angles to the magnetic north/south orientation. Thinner magnets do not have this convenient characteristic. This magnet is also popular for rebating into timber, fibreboard or similar materials as they provide a good holding effect with little impact on the structural integrity of the material they are embedded in.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
