Great product, great service!
Using this magnet to operate reed switch which are used for wind speed and direction sensors.
Product code: 21035
This cylinder magnet has a diameter of 8mm and a height of 15mm. It has a magnetic flux reading of 6087 Gauss and a pull force of 2.5 kg against 3mm mild steel. It is identified as part number 21035.
These small but powerful Neodymium Cylinder magnets have a small pole surface area but their long-bodied shape enhances the depth of the magnetic field. These characteristics are largely the opposite to Disc-shaped magnets and this makes them easy to grasp and easy to relocate from one surface to the next Narrow and deep magnetic fields are useful in circumstances where metal detection through other materials is required, or for holding applications where a delicate or temporary hold is more appropriate. Cylinders are also ideal for embedding into round drill holes to make a magnetic join between two surfaces without the permanence or unsightly nature of nails or screws. Magnetic hold can be used in sophisticated industrial systems where they operate sensors and safety valves or simple and practical applications at the office, home or studio.
Neodymium Cylinder Magnet - 8mm x 15mm (21035)
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
This cylinder magnet has a diameter of 8mm and a height of 15mm. It has a magnetic flux reading of 6087 Gauss and a pull force of 2.5 kg against 3mm mild steel. It is identified as part number 21035.
These small but powerful Neodymium Cylinder magnets have a small pole surface area but their long-bodied shape enhances the depth of the magnetic field. These characteristics are largely the opposite to Disc-shaped magnets and this makes them easy to grasp and easy to relocate from one surface to the next Narrow and deep magnetic fields are useful in circumstances where metal detection through other materials is required, or for holding applications where a delicate or temporary hold is more appropriate. Cylinders are also ideal for embedding into round drill holes to make a magnetic join between two surfaces without the permanence or unsightly nature of nails or screws. Magnetic hold can be used in sophisticated industrial systems where they operate sensors and safety valves or simple and practical applications at the office, home or studio.
Neodymium Cylinder Magnet - 8mm x 15mm (21035)
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.