Neodymium Cylinder Magnet - 6.35mm x 6.35mm

Product code: 21050

$1.80for 1 to 9 items
$1.42buy 10 to 99 itemsand save 21%
$1.26buy 100+ itemsand save 30%

Prices are GST Incl.

Volume pricing available on request

Neodymium Cylinder Magnet - 6.35mm x 6.35mm

Product Code 21050
Pull Force* 1.3 kg
Weight 1 gm
Style Rare Earth Cylinder magnet
Coating Nickel (NiCuNi)
Direction of Magnetisation Axially magnetised
Dimensions Height:6.35mm, Diameter:6.35mm

Magnetic Product Description:

This rare earth cylinder has a diameter of 6.35mm and a height of 6.35mm. It has a magnetic flux reading of 5635 Gauss and a pull force of 1.3 kilos. Its part number is 21050.

Uses for our rare earth cylinder magnets:

These strong Neodymium Cylinders are of equal 1/4 " height and diameter in the Imperial scale. The small diameter pole surface at each end is to some extent compensated for by the depth of the magnetic material. It creates more volume, and this results in stronger magnetic power than flatter, Disc-shaped magnets. Cylinders have a narrow penetrative field that can be a useful attribute in certain scenarios or occupations. Jewellery makers, Fashion designers and Milliners, for example, can make magnetic clasps, buttons or attachment points for their creations, that bond with precision, simplicity and some would say, a degree of panache!.

Neodymium Cylinder Magnet - 6.35mm x 6.35mm (21050)

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.

Magnetic Product Description:

This rare earth cylinder has a diameter of 6.35mm and a height of 6.35mm. It has a magnetic flux reading of 5635 Gauss and a pull force of 1.3 kilos. Its part number is 21050.

Uses for our rare earth cylinder magnets:

These strong Neodymium Cylinders are of equal 1/4 " height and diameter in the Imperial scale. The small diameter pole surface at each end is to some extent compensated for by the depth of the magnetic material. It creates more volume, and this results in stronger magnetic power than flatter, Disc-shaped magnets. Cylinders have a narrow penetrative field that can be a useful attribute in certain scenarios or occupations. Jewellery makers, Fashion designers and Milliners, for example, can make magnetic clasps, buttons or attachment points for their creations, that bond with precision, simplicity and some would say, a degree of panache!.

Neodymium Cylinder Magnet - 6.35mm x 6.35mm (21050)

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.