Neodymium Block Magnet - 50mm x 10mm x 6mm | N45

Product code: 22005C

$24.73for 1 to 9 items
$18.47buy 10 to 99 itemsand save 25%
$16.20buy 100+ itemsand save 34%

Prices are GST Incl.

Volume pricing available on request

Neodymium Block Magnet - 50mm x 10mm x 6mm | N45

Rated 5.0 out of 5
Based on 1 review
Product Code 22005C
Pull Force* 12.60 kg
Weight 52 gm
Style Neodymium Rectangular Block magnet
Coating Nickel (NiCuNi)
Direction of Magnetisation Axially magnetised
Dimensions Width:10mm, Height:6mm, Length:50mm

Magnetic Product Description:

This Rectangular Block Magnet has a length of 50mm, a width of 10mm and a height of 6mm. This magnet has a pull force of 12.60 kgs against 5 mm mild steel. It has a Nickel (NiCuNi) coating. It is identified by AMF Part Number 22005C.

Uses for our powerful Rare Earth Block Magnets:

Block magnets instinct to bond and release at threshold pressure, or quit the grip force defines them as virtual ‘torque limiters’ or an ‘overload clutch’. These failsafe mechanisms are installed to protect machinery or products in crash stops and jams, protecting the device from serious failure. Once the excessive force event has been addressed, the magnetic instinct is to re-engage, to its original position, as if for the first time, renewed.

Neodymium blocks are compatible, like peas in a pod, no matter what the material, but especially plastics.

This is a great all-purpose rectangular magnet which can be used when a reasonable amount of force is required. Applications such as water purification, commercial door holders and for general, engineering and industrial uses.

Neodymium Block Magnet - 50mm x 10mm x 6mm | N45 (22005C)

Grade
N35 N/A
Max Operating Temperature °C
<=80 N/A
Remanence
1.18-1.25 N/A
Coercivity
11.8-12.5>=859 N/A
Intrinsic Coercivity
>=10.8 N/A
Max Energy Product
>=955 N/A
Grade N35
Max Operating Temperature °C <=80
Remanence 1.18-1.25
Coercivity 11.8-12.5>=859
Intrinsic Coercivity >=10.8
Max Energy Product >=955

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.

average rating 5.0 out of 5
Based on 1 review
  • 5 Stars
    1 Review
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
1 Review
Reviewed by Josh
I recommend this product
Rated 5 out of 5
Review posted

Strong repelling force

I used these Neodymium magnets as a repelling force to make a diy drum pedal, using them instead of the usual spring to bounce the foot back up - magic

Loading...
Was this helpful?

Magnetic Product Description:

This Rectangular Block Magnet has a length of 50mm, a width of 10mm and a height of 6mm. This magnet has a pull force of 12.60 kgs against 5 mm mild steel. It has a Nickel (NiCuNi) coating. It is identified by AMF Part Number 22005C.

Uses for our powerful Rare Earth Block Magnets:

Block magnets instinct to bond and release at threshold pressure, or quit the grip force defines them as virtual ‘torque limiters’ or an ‘overload clutch’. These failsafe mechanisms are installed to protect machinery or products in crash stops and jams, protecting the device from serious failure. Once the excessive force event has been addressed, the magnetic instinct is to re-engage, to its original position, as if for the first time, renewed.

Neodymium blocks are compatible, like peas in a pod, no matter what the material, but especially plastics.

This is a great all-purpose rectangular magnet which can be used when a reasonable amount of force is required. Applications such as water purification, commercial door holders and for general, engineering and industrial uses.

Neodymium Block Magnet - 50mm x 10mm x 6mm | N45 (22005C)

Grade
N35 N/A
Max Operating Temperature °C
<=80 N/A
Remanence
1.18-1.25 N/A
Coercivity
11.8-12.5>=859 N/A
Intrinsic Coercivity
>=10.8 N/A
Max Energy Product
>=955 N/A
Grade N35
Max Operating Temperature °C <=80
Remanence 1.18-1.25
Coercivity 11.8-12.5>=859
Intrinsic Coercivity >=10.8
Max Energy Product >=955

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.

average rating 5.0 out of 5
Based on 1 review
  • 5 Stars
    1 Review
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
1 Review
Reviewed by Josh
I recommend this product
Rated 5 out of 5
Review posted

Strong repelling force

I used these Neodymium magnets as a repelling force to make a diy drum pedal, using them instead of the usual spring to bounce the foot back up - magic

Loading...
Was this helpful?