Stick with this company
Easy to order, came very quickly and very well wrapped. Very good range and price. Will use again
Product code: 22006F
This rectangular block magnet has a length of 43mm, width of 29mm and a height of 11mm. It has a magnetic flux of 3138 Gauss and a pull force of 27.8 kg against 5mm mild steel. It uses the AMF magnetic part number 22006F for identification purposes.
Ideal as a general purpose magnet where high magnetic strength is required. It has many capabilities due to its strength and shape and is found in many industrial applications.Axially magnetised to give the largest two surfaces either a North or South polarity.
Neodymium Block Magnet - 43mm x 29mm x 11mm (22006F)
Grade | |
---|---|
N38 | N/A |
Max Operating Temperature °C | |
<=80 | N/A |
Remanence | |
1.09-1.17 | N/A |
Coercivity | |
12.3-13>=859 | N/A |
Intrinsic Coercivity | |
>=10.8 | N/A |
Max Energy Product | |
>=955 | N/A |
Grade | N38 |
Max Operating Temperature °C | <=80 |
Remanence | 1.09-1.17 |
Coercivity | 12.3-13>=859 |
Intrinsic Coercivity | >=10.8 |
Max Energy Product | >=955 |
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
This rectangular block magnet has a length of 43mm, width of 29mm and a height of 11mm. It has a magnetic flux of 3138 Gauss and a pull force of 27.8 kg against 5mm mild steel. It uses the AMF magnetic part number 22006F for identification purposes.
Ideal as a general purpose magnet where high magnetic strength is required. It has many capabilities due to its strength and shape and is found in many industrial applications.Axially magnetised to give the largest two surfaces either a North or South polarity.
Neodymium Block Magnet - 43mm x 29mm x 11mm (22006F)
Grade | |
---|---|
N38 | N/A |
Max Operating Temperature °C | |
<=80 | N/A |
Remanence | |
1.09-1.17 | N/A |
Coercivity | |
12.3-13>=859 | N/A |
Intrinsic Coercivity | |
>=10.8 | N/A |
Max Energy Product | |
>=955 | N/A |
Grade | N38 |
Max Operating Temperature °C | <=80 |
Remanence | 1.09-1.17 |
Coercivity | 12.3-13>=859 |
Intrinsic Coercivity | >=10.8 |
Max Energy Product | >=955 |
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.