Great quality magnet
Awesome magnet, great quality and received quickly. Unfortunately even though it was packed and shipped really well, it did come with a small scratch/chip on the edge (
Product code: 22006E
This block magnet is 38mm square with a thickness of 10mm. It has a magnetic flux reading of 2692 Gauss and a pull force of 27.6 kg against 5mm mild steel. It is identified using the AMF magnet part number 22006E.
As with all square block magnets, this is a versatile shape and size. It is a powerful magnet, useful for general and industrial applications. Magnetised through the 10mm height dimension or "thickness", the North and South poles will be found on the larger square surfaces when laid flat.
Neodymium Block - 38mm x 38mm x 10mm (22006E)
Grade | |
---|---|
N38 | N/A |
Max Operating Temperature °C | |
<=80 | N/A |
Remanence | |
1.09-1.17 | N/A |
Coercivity | |
12.3-13>=859 | N/A |
Intrinsic Coercivity | |
>=10.8 | N/A |
Max Energy Product | |
>=955 | N/A |
Grade | N38 |
Max Operating Temperature °C | <=80 |
Remanence | 1.09-1.17 |
Coercivity | 12.3-13>=859 |
Intrinsic Coercivity | >=10.8 |
Max Energy Product | >=955 |
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
This block magnet is 38mm square with a thickness of 10mm. It has a magnetic flux reading of 2692 Gauss and a pull force of 27.6 kg against 5mm mild steel. It is identified using the AMF magnet part number 22006E.
As with all square block magnets, this is a versatile shape and size. It is a powerful magnet, useful for general and industrial applications. Magnetised through the 10mm height dimension or "thickness", the North and South poles will be found on the larger square surfaces when laid flat.
Neodymium Block - 38mm x 38mm x 10mm (22006E)
Grade | |
---|---|
N38 | N/A |
Max Operating Temperature °C | |
<=80 | N/A |
Remanence | |
1.09-1.17 | N/A |
Coercivity | |
12.3-13>=859 | N/A |
Intrinsic Coercivity | |
>=10.8 | N/A |
Max Energy Product | |
>=955 | N/A |
Grade | N38 |
Max Operating Temperature °C | <=80 |
Remanence | 1.09-1.17 |
Coercivity | 12.3-13>=859 |
Intrinsic Coercivity | >=10.8 |
Max Energy Product | >=955 |
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.