Back to cart
Product code: 59057A
Prices are GST Incl.
Volume pricing available on requestAustralia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
This self adhesive magnetic tape has a width of 10mm and a thickness of 1.5mm, and adhesive. The magnetic roll comes in a length of 30 metres. Made from Strontium or Barium ferrite powder within a polymer matrix, our self-adhesive magnetic tape provides good demagnetization resistance and reasonable resistance to chemical agents. Identified by the AMF Magnetics part number 59057A. This product is not recommended for use with large sheets of perspex thicker than 6mm.
Please see Magnafix Direction of Use here
This product, PART A can be used in conjunction with PART B for a matching Magnetic bond between non-metallic surfaces.
For the thousands of grey nomads that roam the nation's highways, enjoying the freedom of retirement, this magnetic self-adhesive tape, 25mm wide and available in 30metre lengths, can be extremely useful around their Winnebago, motorhome or any other type of mobile accommodation. Parts A and B attract via their opposing poles to create a convenient closure or sealing system for doors and screens or storage compartment openings These strong magnetic strips provide a convenient fixing method that can be both permanent and simple to remove without damaging any surfaces. This flexible magnetic tape is able to be fixed to non-magnetic surfaces via the peel away, paper backed self-adhesive surface, so two non-metallic surfaces can bond and attach magnetically. This can be an effective and economical way to seal openings and help insulate from the heat or cold weather as the seasons and geographical locations change. This system also makes it easy to attach screens to windows or attach shade or insect screens to annexes overnight or temporarily and then removed at the end of your stay. Simply cut each tape to the size you require.
For best results, apply the adhesive side to a clean, dry surface and allow it to cure for 24 hours before attaching any weight to the magnet.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
NB: Ranges are indicative for product category, please check individual products for specific values within that range.
This self adhesive magnetic tape has a width of 10mm and a thickness of 1.5mm, and adhesive. The magnetic roll comes in a length of 30 metres. Made from Strontium or Barium ferrite powder within a polymer matrix, our self-adhesive magnetic tape provides good demagnetization resistance and reasonable resistance to chemical agents. Identified by the AMF Magnetics part number 59057A. This product is not recommended for use with large sheets of perspex thicker than 6mm.
Please see Magnafix Direction of Use here
This product, PART A can be used in conjunction with PART B for a matching Magnetic bond between non-metallic surfaces.
For the thousands of grey nomads that roam the nation's highways, enjoying the freedom of retirement, this magnetic self-adhesive tape, 25mm wide and available in 30metre lengths, can be extremely useful around their Winnebago, motorhome or any other type of mobile accommodation. Parts A and B attract via their opposing poles to create a convenient closure or sealing system for doors and screens or storage compartment openings These strong magnetic strips provide a convenient fixing method that can be both permanent and simple to remove without damaging any surfaces. This flexible magnetic tape is able to be fixed to non-magnetic surfaces via the peel away, paper backed self-adhesive surface, so two non-metallic surfaces can bond and attach magnetically. This can be an effective and economical way to seal openings and help insulate from the heat or cold weather as the seasons and geographical locations change. This system also makes it easy to attach screens to windows or attach shade or insect screens to annexes overnight or temporarily and then removed at the end of your stay. Simply cut each tape to the size you require.
For best results, apply the adhesive side to a clean, dry surface and allow it to cure for 24 hours before attaching any weight to the magnet.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
NB: Ranges are indicative for product category, please check individual products for specific values within that range.
The Pull Force listed for each magnet is based on lifting 10mm thick steel from a horizontal surface. Magnets on a vertical surface (of 10mm thick steel) are generally able to hold around only 30% of the pull force listed in the product description. This is due to the effects of gravity and the lack of friction between the surface and the shiny magnet. Read More
