Reviewed by John
I recommend this product
excellent
Quick service excellent service
Loading...
Was this helpful?
Ferrite Block Magnet - 16mm x 13mm x 4mm | 4mm Hole
Product code: 12145
$0.98for 1 to 999 items
$0.76buy 1000 to 9999 itemsand
save 23%
$0.68buy 10000+ itemsand
save 31%
Ferrite Block Magnet - 16mm x 13mm x 4mm | 4mm Hole
Rated 5.0 out of 5
Product Code
12145
Pull Force*
0.38 kg
Weight
4 gm
Style
Ferrite block magnet (4mm Hole)
Direction of Magnetisation
Axially magnetised
Dimensions
Width:13mm, Height:4mm, Length:16mm
Magnetic Product Description:
This ferrite block magnet is 16mm long, 13mm wide and 4mm thick with a 4mm hole in the centre. With a magnetic flux reading of 1941 Gauss it has a pull force of 38 grams. It is identified by the AMF magnet part number 12145.
Uses for our ferrite block magnets:
Ferrite blocks are heat resistant, corrosion resistant and very cost effective when it comes to considering types of permanent magnets. Different sizes and thicknesses are available that can exert enough holding power for a particular application. Positioning this Ferrite Block magnet is made easier by using the centrally located 4mm hole. A pin or screw-like fastener can be used to hold it in place permanently or as needed. A small amount of Epoxy adhesive will provide a more permanent attachment. In some temporary situations, a piece of wire, string or cable-tie may be used so it can be removed or relocated at a later date. Ferrite material is brittle, so careful handling and placement is required to avoid damage like chipping and cracking.
Ferrite Block Magnet - 16mm x 13mm x 4mm | 4mm Hole (12145)
NB: Ranges are indicative for product category, please check individual products for specific values within that range.
Magnetic Product Description:
This ferrite block magnet is 16mm long, 13mm wide and 4mm thick with a 4mm hole in the centre. With a magnetic flux reading of 1941 Gauss it has a pull force of 38 grams. It is identified by the AMF magnet part number 12145.
Uses for our ferrite block magnets:
Ferrite blocks are heat resistant, corrosion resistant and very cost effective when it comes to considering types of permanent magnets. Different sizes and thicknesses are available that can exert enough holding power for a particular application. Positioning this Ferrite Block magnet is made easier by using the centrally located 4mm hole. A pin or screw-like fastener can be used to hold it in place permanently or as needed. A small amount of Epoxy adhesive will provide a more permanent attachment. In some temporary situations, a piece of wire, string or cable-tie may be used so it can be removed or relocated at a later date. Ferrite material is brittle, so careful handling and placement is required to avoid damage like chipping and cracking.
Ferrite Block Magnet - 16mm x 13mm x 4mm | 4mm Hole (12145)
NB: Ranges are indicative for product category, please check individual products for specific values within that range.