Neodymium Arc Magnet (59.5°) - (OD)70.7mm x (ID)60mm x 5.35mm

Product code: 88953

$14.09for 1 to 9 items
$12.47buy 10 to 99 itemsand save 12%
$11.52buy 100+ itemsand save 18%

Prices are GST Incl.

Volume pricing available on request

Neodymium Arc Magnet (59.5°) - (OD)70.7mm x (ID)60mm x 5.35mm

Rated 5.0 out of 5
Based on 1 review
Product Code 88953

Magnetic Product Description:

This Neodymium Arc Magnet has an angle of 59.5°.

70.7 outer diameter, and a 60 inner diameter, a 5mm thickness and a width of 15mm.  

It is identified by the AMF magnet part number 88953. 

Uses for our Rare Earth Arc Magnets:

These Neodymium arc magnets are much more useful than they look. Neodymium Arc Magnets and the field they emit are used in DC electric motors and generators to create rotational movement by interacting with electrical currents that cause their alternating poles to repel and attract. This energy generating principle is utilized in battery powered motors of power tools, white goods, starter motors, turbines and just about anything that converts DC electricity into mechanical power or movement. The power created is both constant and variable and instigated by adjusting the electrical current. Cordless tools and equipment have increased in popularity, and improved battery technology using Lithium-ion and expensive but efficient brushless motors have enhanced their performance and battery life while reducing recharge times. 

Smaller neodymium arc magnets are commonly used in DC motors as sensors.

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.

average rating 5.0 out of 5
Based on 1 review
  • 5 Stars
    1 Review
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
1 Review
Reviewed by Jack
I recommend this product
Rated 5 out of 5
Review posted

excellent product

Very strong magnet, sufficient to use as a magnet for a fly wheel magneto to power a single cylinder engine, but has to be glued in position as there is no bolt hole to secure magnet.

Loading...
Was this helpful?

Magnetic Product Description:

This Neodymium Arc Magnet has an angle of 59.5°.

70.7 outer diameter, and a 60 inner diameter, a 5mm thickness and a width of 15mm.  

It is identified by the AMF magnet part number 88953. 

Uses for our Rare Earth Arc Magnets:

These Neodymium arc magnets are much more useful than they look. Neodymium Arc Magnets and the field they emit are used in DC electric motors and generators to create rotational movement by interacting with electrical currents that cause their alternating poles to repel and attract. This energy generating principle is utilized in battery powered motors of power tools, white goods, starter motors, turbines and just about anything that converts DC electricity into mechanical power or movement. The power created is both constant and variable and instigated by adjusting the electrical current. Cordless tools and equipment have increased in popularity, and improved battery technology using Lithium-ion and expensive but efficient brushless motors have enhanced their performance and battery life while reducing recharge times. 

Smaller neodymium arc magnets are commonly used in DC motors as sensors.

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.

average rating 5.0 out of 5
Based on 1 review
  • 5 Stars
    1 Review
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
1 Review
Reviewed by Jack
I recommend this product
Rated 5 out of 5
Review posted

excellent product

Very strong magnet, sufficient to use as a magnet for a fly wheel magneto to power a single cylinder engine, but has to be glued in position as there is no bolt hole to secure magnet.

Loading...
Was this helpful?