Product code: 22005C
Leading Magnet Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
This Rectangular Block Magnet has a length of 50mm, a width of 10mm and a height of 6mm. This magnet has a pull force of 12.60 kgs against 5 mm mild steel. It has a Nickel (NiCuNi) coating. It is identified by AMF Part Number 22005C.
Block magnets instinct to bond and release at threshold pressure, or quit the grip force defines them as virtual ‘torque limiters’ or an ‘overload clutch’. These failsafe mechanisms are installed to protect machinery or products in crash stops and jams, protecting the device from serious failure. Once the excessive force event has been addressed, the magnetic instinct is to re-engage, to its original position, as if for the first time, renewed.
Neodymium blocks are compatible, like peas in a pod, no matter what the material, but especially plastics.
This is a great all-purpose rectangular magnet which can be used when a reasonable amount of force is required. Applications such as water purification, commercial door holders and for general, engineering and industrial uses.
No FAQ available
The Pull Force listed for each magnet is based on lifting 10mm thick steel from a horizontal surface. Magnets on a vertical surface (of 10mm thick steel) are generally able to hold around only 30% of the pull force listed in the product description. This is due to the effects of gravity and the lack of friction between the surface and the shiny magnet. Read More
