Reviewed by TonyB
I recommend this product
Good magnets
I can recommend, arrived on time and accurate dimensions. 5 stars if more affordable. Used for magnetic switches on welding clamps.
Loading...
Was this helpful?
Neodymium Cylinder Magnet - 10mm x 10mm
Product code: 21026
$6.33for 1 to 9 items
$5.41buy 10 to 99 itemsand
save 15%
$4.51buy 100+ itemsand
save 29%
Neodymium Cylinder Magnet - 10mm x 10mm
Rated 4.5 out of 5
Product Code
21026
Pull Force*
3.6 kg
Weight
6 gm
Style
Rare Earth Cylinder magnet
Coating
Nickel (NiCuNi)
Direction of Magnetisation
Axially magnetised
Dimensions
Height:10mm, Diameter:10mm
Magnetic Product Description:
This rare earth cylinder has the same height and diameter of 10mm. It has a magnetic flux reading of 5635 Gauss and a pull force against 3-5 mm mild steel of 3.6 kgs. Identified by part number 21026.
Uses for our rare earth cylinder magnets:
Cylindrical shaped Neodymium magnets are ideally suited where holes made by a drill or formed in plastic, need to be filled with a round shape magnet, to create a strong bond between surfaces. The bond will release when an appropriate amount of pressure is applied. This can include metal surfaces, or when corresponding North / South magnets are embedded in both surfaces, any material can be used. Modern day designers find magnetic attachment a very efficient and practical way to fasten components or modules together, Once installed, usually with an epoxy glue, magnets allow easy assembly and instant deconstruction without the need for tools, mains power or trade skills. Unlike screws or staples, a magnetic bond can provide fast access for scheduled cleaning or other important requirements, like repeated relocation of products or marketing material at trade shows, market stalls or at remote outdoor sites like festivals or sporting events.
Neodymium Cylinder Magnet - 10mm x 10mm (21026)
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Magnetic Product Description:
This rare earth cylinder has the same height and diameter of 10mm. It has a magnetic flux reading of 5635 Gauss and a pull force against 3-5 mm mild steel of 3.6 kgs. Identified by part number 21026.
Uses for our rare earth cylinder magnets:
Cylindrical shaped Neodymium magnets are ideally suited where holes made by a drill or formed in plastic, need to be filled with a round shape magnet, to create a strong bond between surfaces. The bond will release when an appropriate amount of pressure is applied. This can include metal surfaces, or when corresponding North / South magnets are embedded in both surfaces, any material can be used. Modern day designers find magnetic attachment a very efficient and practical way to fasten components or modules together, Once installed, usually with an epoxy glue, magnets allow easy assembly and instant deconstruction without the need for tools, mains power or trade skills. Unlike screws or staples, a magnetic bond can provide fast access for scheduled cleaning or other important requirements, like repeated relocation of products or marketing material at trade shows, market stalls or at remote outdoor sites like festivals or sporting events.
Neodymium Cylinder Magnet - 10mm x 10mm (21026)
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.