Reviewed by John D.
Verified Buyer
I recommend this product
Great small magnets
They were just what I needed for the small drawers I had made.
Loading...
Was this helpful?
Neodymium Countersunk Pot Magnet - D12mm x 5mm
Product code: PMYP-A12
$2.95for 1 to 9 items
$2.67buy 10 to 99 itemsand
save 10%
$2.33buy 100+ itemsand
save 21%
Total
$2.95
Prices are GST Incl.
Volume pricing available on requestLeading Magnet Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Neodymium Countersunk Pot Magnet - D12mm x 5mm
Rated 4.5 out of 5
Product Code
PMYP-A12
Pull Force*
2.5 kg
Weight
5 gm
Style
Rare earth countersunk pot magnet
Coating
Nickel (NiCuNi)
Dimensions
Diameter:12mm
*Measured against up to 10mm mild steel.
Magnetic Product Description:
This Rare Earth Pot Magnet has a diameter of 12mm, a countersunk hole diameter of 3.5mm to 5mm and a thickness of 5mm. It has a pull force of 2.5kg and a weight of 5 grams. It is identified by AMF Magnet part number PMYP-A12.
Uses for our rare earth countersunk pot magnets:
Holding pot magnets are designed to be strong and durable. The steel casing protects the magnet from damage and also increases magnetic strength at the base. These strong Neodymium Pot Magnets have countersunk mounting holes allowing them to conveniently attach to any material using a tapered head screw. Unlike glue, the screw will secure them in place to create a permanent magnet solution, even in harsh conditions.
Once in place, the magnet can be used to hold metallic items on a vertical or horizontal non-metallic surface. Steel objects can then be held in place, or when the magnet is used in conjunction with a steel striker plate, a magnetic closure system can be created. This type of arrangement can be useful for keeping doors and gates open or closed, or for attaching screens, coverings or signage that needs to be periodically removed.
The flat base of the 12mm diameter Pot Magnet is predominantly South in polarity. AMF has an extensive range of sizes in the countersunk Pot Magnet range.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
